BGQCN - PRIMER, EPOXY CIG, CORR INHIB, LEAD & CHR
- MSDS: BGQCN
- Manufacturer: PRATT AND LAMBERT
- Product Name: PRIMER, EPOXY CIG, CORR INHIB, LEAD & CHR
- National Stock Number: 8010-01-187-9820
Product Identification
Product ID:PRIMER, EPOXY CIG, CORR INHIB, LEAD & CHR
MSDS Date:01/01/1987
FSC:8010
NIIN:01-187-9820
Kit Part:Y
MSDS Number: BGQCN
Responsible Party
WICHITA, KS 67201
US
Cage: PRATT
Contractor
Telephone: 216-566-2902
Cage: 61196
Ingredients
PROPYLENE GLYCOL METHYL ETHER KETONE
RTECS: UJ2650000
Fraction By Weight: 25%
ACGIH TLV: 200PPM
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 25%
OSHA PEL 200 PPM
ACGIH TLV: 200 PPM/300STEL;9394
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
NORMAL BUTYL ALCOHOL
RTECS: EO1575000
Fraction By Weight: <5%
ACGIH TLV: 50PPM
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 8%
OSHA PEL 200 PPM; Z-2
ACGIH TLV: S, 50 PPM; 9394
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: <0.5%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM/150STEL;9394
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Effects of Overexposure:INHAL:ANESTHETIC. IRRITATION OF NOSE, THROAT,
EYES & POSSIBLE DIZZINESS & NAUSEA.
First Aid
First Aid:INHAL:REMOV FR EXPOSUR & PROVID FRESH AIR.SPLASH EYES:FLUSH
IMMED. W/LG AMTS OF WATER F/15 MIN. SPLASH SKIN:REMOV
CONTAM.CLOTHING & WASH AFFECTED AREA W/WATR. INGESTION:DO NOT
INDUCE VOMITING. CONSULT A DR. IMMED. IN ALL CASES.
Fire Fighting
Flash Point:21 F -6 C TCC
Extinguishing Media:CARBON DIOXIDE,DRY CHEM OR ALCOH FOAM
Fire Fighting Procedures:SELF-CONTND BREATHING APPARAT SHLD BE AVAIL F/
Unusual Fire/Explosion Hazard:KEEP CONTNRS TIGHTLY CLOS.ISOLATE FRM
HEAT,ELECT EQPMT,SPARKS & OPN FLAME.CLOS CNTNRS MAY EXPLO(SUP)
Accidental Release
Spill Release Procedures:REMOV ALL SOURCES OF IGNIT (FLAMES,HOT
SURFACES,ELECTR, STATIC OR FRICTIONAL SPARKS). VENTILAT AREA &
AVOID BREATHING VAPORS.REMOV W/INERT ABSORBENT & USE NON-SPARKING
TOOLS.STEPS MUST BE TAKEN TO AVO ID CONTAM OF GROUND WATER OR
STREAMS.
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 120 F.STORE LG
QTYS. IN COMPLIANCE W/OSHA 1910.106.CONTNRS SHLD BE GROUNDED &
BONDED TO THE RECEIVING CONTAINER.
Other Precautions:DO NOT CUT OR WELD ON EMPTY CONTNR. "DO NOT USE UNTIL
ALL SAFETY PRECAUTIONS HAVE BEEN READ & FULLY UNDERSTOOD BY THE
USER.
Exposure Controls
Respiratory Protection:USE NIOSH APPRVD MECH RESPIRAT TO REMOV
OVERSPRAY WHN SPRA OUTDR OR
Ventilation:PROVID GEN DILUT OR LOC EXHAUST VENT IN VOLM TO KEEP BELO
AC
Protective Gloves:SOLVNT IMPERMEA
Eye Protection:SAFETY EYEWEAR
Other Protective Equipment:PROTECTIVE EQPMT TO PRVNT SKIN CONTCT.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:174-344 F
Vapor Density:HEAV
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:59
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTCT W/STRONG ACIDS OR ALKALIS
Stability Condition to Avoid:FIRES, HEAT, SPARKS, & HOT SURFACES
Hazardous Decomposition Products:SMOKE & OXIDES OF NIROGN & CARBON WHN
BURNED.
Conditions to Avoid Polymerization:DO NOT ADD DRIERS/REACTV CHEM W/O
TECHN SUPRVSN.SEE LABEL
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE W/LOCAL, STATE & FED.
REGULATIONS. INCINERATE IN EPA APPRVD FACILITY. DO NOT INCINERATE
CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.